5.0 Operations
24
1210 QuickStep Programming User Manual, Ver 5.0
Ver-Mac - May 2011
5.5.3 Modifying an Existing Sequence
[
] Enter > Main Menu > [F2] Sequence
Figure 25 – Sequence Number Selection Screen
1.
Use the keypad to enter a sequence number (from 1 – 8 inclusive)
2.
Press
[F1]
Edit to modify the selected sequence.
3.
Use
[
]
arrow keys to locate the message page to be modified in
the sequence
4.
Press
[
] Enter
to erase the message number
5.
According to the modification you want to make:
•
Enter the three digit message number of the replacement text
message, and then press
[F1] TIME
to set any new timings for
the replacement text message page
or
•
Press the
[X]
key to access the Arrow selection screen. Select
the image and then the signal display option
or
•
Enter 000 to create a sequence cutoff page
Note:
Select Sequence 0 and stop the currently running sequence before editing a
message or sequence.
Note:
You cannot erase a sequence. You can only vary the number of message
pages in a selected sequence and their contents.
Note:
When you enter 000 and create a cutoff page you cancel all remaining
message pages in the original sequence.