Veolia ELGA PURELAB Option-S 15-US, Руководство оператора, Страница: 19 / 34

ELGA PURELAB Option-S 7/15 US Operator Manual
PURELAB Option-S 7/15 US Version 1 08/14 Page 15
5.4 Initial Controller Set-Up
The PURELAB Option-S US control panel is fitted with three control
buttons. These are:
1. The PROCESS button, which switches the
purification process ON and OFF.
2. Two software controlled touch pad buttons which
are used to control set-up and process control
functions.
When the PURELAB Option-S US unit is started for the first time
after installation the following steps should be carried out to set up
system preferences:
Step 1 - Setting Up Menu Options
SWITCH the mains power on to initialize the controller hardware
set-up sequence.
Note: Always allow the initialization process to
complete. This is indicated by the
appearance of the MENU icon on the
control screen.
PRESS the MENU button to go to the next screen to activate
the set-up menu sequence.
A series of set-up screens will now be displayed. Various control
icons are used to allow you to step through the set up instruction
process. These icons include:
• A “scroll” icon indicated by an arrow
• An “accept” button indicated by a tick

• A “selection” icon indicated by a

Step 2 - Auto / Manual Restart
This allows the selection of the AUTO/MANUAL restart option. If
auto restart is selected the unit will automatically restart after a
power failure. In manual mode the unit will remain in standby.
Select the option required using the
button and accept with
the

button.
Step 3 - Audible Alarm Enabled / Disabled
This display provides the option of either enabling the audible
alarm causing it to sound or disabling the audible alarm causing
it to remain muted whilst it flashes the alarm. Select the option
required using the
button and accept with the

button.
Process button
Touch pad buttons
Menu
Start Up Screens
Auto Restart
Manual Restart
Auto/Manual Restart
Audible Alarm Enabled
Audible Alarm Disabled
Audible Alarm Enable/Disable