APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
OUT 1
Bluetooth data output 1, 9600 rate
KISS HEX
outputs standard KISS data instructions for various standard APRS computers or PC software
UI
outputs standard UI text data for uploading the server, or secondary development by the user.
GPWPL
outputs standard GPWPL waypoint data, user GARMIN navigator
KISS ASC
outputs standard KISS ASC data instructions for secondary development of users
GS232B
output standard GS232B data command for G5500 rotator control
OFF
closes the output data
OUT 2
Bluetooth data output 2, 9600 rate
GPS
outputs GPS data (GNRMC+GNGGA), which can be mixed with OUT 1 at the same time.
OFF
t turns off GPS output
Bluetooth power switch
ON/OFF
APRS digital repeater DIGI function
Able to set 2 repeater names
Repeater Name 1:
Default WIDE1 number or English uppercase, up to 6 digits
Repeater Name 2:
Default WIDE2 number or English uppercase, up to 6 digits
Forwarding condition:
When the device receives is a valid beacon,
And the beacon contains the local repeater name, and the number of forwarding times is greater than 1,
The device will forward once, and reset the number of forwarding times, reduce it once, and repackage it.
If the number of forwardings is 0 in the beacon, it will not be forwarded.
APRS digital repeater, each forwarding, is the process of receiving, decoding, re-encoding, and transmitting. Therefore,
no matter how many times of forwarding, the signal quality is always the best, which is the difference from the
traditional analog voice repeater.
APRS digital trunk, because the beacon contains the specified number of forwarding, so it will not forward indefinitely
