APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
GPS power saving function
When manually pressed, or when the time arrives, the GPS will be automatically turned on, the GPS will be
hot-started, positioned within a few seconds, then launched, and the GPS will be turned off again.
Note:
Only manual mode or timing mode is active.
PATH 1 , PATH 2
Requires the number of relay forwarding and forwarding names of WIDE1 or WIDE2.
The default setting is WIDE1-1 WIDE2-0, which means that the relay named WIDE1 is forwarded once and WIDE2 is
not required to be forwarded.
MIC-E
The beacon data is compressed and transmitted, which effectively shortens the transmission time, reduces the
probability that the data is interfered by other signals in the air, and improves the decoding success rate of the receiver.
PTT delay
Before the signal is transmitted, the PTT triggers the delay. When the other party's SQL response is slow, the PTT
delay parameter can be increased.
Icon 1:
! Indicates the data type character, fixed length 1 word, generally do not need to be changed. If you need to modify,
refer to the APRS protocol manual.
/ indicates the icon set, generally do not need to be changed. For modifications, refer to the APRS protocol manual.
> Indicates the icon style displayed on the server map, with a fixed length of 1 word, refer to the APRS Icon Set to
change.
Auto icon 2:
Three parameters: wait time, 2nd icon, and 2nd icon set.
180 waiting time, in seconds
/ indicates the second icon set P means the second icon
