VENUS CONCEPT Venus Viva Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 53

VENUS CONCEPT Venus Viva Скачать руководство пользователя страница 18

Venus VIVA User Manual Effective Date: 28.07.13 P/N: DCVIROW3 Rev.01

5. Operating the System

Turning the System On/Off

Before turning the System “ON”, verify that the power cord is connected to the inlet

located on the rear panel of the system and to the main power outlet.

Switch on the system by turning the main power switch located in the rear panel of the

system to its “ON” position, and by turning on the “ON/OFF” button located underneath the
screen. The ON/OFF button will be illuminated in green and within 50 seconds the Login

Screen (See Figure 5-1) will be displayed on the system's touch screen.

Login Screen

Once Login screen is displayed, enter the 8 character code provided with the installation

documents and press the

Confirm

button (see Figure 5-1, marked A).

It is recommended to change initial Login code, using Set Login Code option in Tools

Menu. Once the correct code has been entered,

the default Treatment screen will be

displayed.

Figure 5-1: Login screen

5-1

«
...
16
17
18
19
20
...
»

Содержание Venus Viva






















































Отзывы:

Нет отзывов