E - 14
cOnnectInG a HIGH-deFInItIOn (Hd) SOURce
High-Definition (HD) Devices with component video output must be connected to the yUV input.
Connect the three video outputs (y, Pb, Pr) from the source to the corresponding video inputs on this unit
(Component video cable not included).
Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input
on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to yUV IN.
To operate the connected device and play the source, first press the FUnctIOn button or the yUV In
button to select the yUV mode.
connectionS
cOnnectInG a Pc
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input
on this unit using a monitor cable (not included).
Connect a stereo audio cable (not included) to the PC AUDIO
IN jack on this unit, and the other end to the AUDIO OUT
jack on your computer’s sound card.
To operate the connected device, first press the FUnctIOn
button to select the PC mode.
notes:
• If the TV is cold, there may be a small “flicker” when the
set is switched on. This is normal, there is nothing wrong
with your TV.
• If possible, use the VESA 1440 x 900 @60Hz video mode
to obtain the best image quality for your LCD monitor. If
used under the other resolutions, some scaled or processed
pictures may appear on the screen. The TV has been pre-
adjusted to the mode VESA 1440 x 900 @60Hz.
* May require a subscription
for receiving HD channels,
check with your cable/
satellite service provider
for details.
Hd SOURce
with component video output
(digital cable Box*, Satellite Receiver*, or
external over-the-air Hd-tuner)
note:
When connecting a DVD player to the television, the picture
resolution is solely dependent upon the resolution supported
by the DVD player attached. DVD player resolutions vary from
480i to 1080i, and this television can support DVD players
up to a maximum resolution of 1080i.
