3
IMPORTANT SAFETY INSTRUCTIONS
1.
Read Instructions -
All the safety and operating instructions should be read before the appliance is operated.
2.
Retain Instructions -
The safety and operating instructions should be retained for future reference.
3.
Heed Warnings -
All warnings on the appliance and in the operating instructions should be adhered to.
4.
Follow Instructions -
All operating and use instructions should be followed.
5.
Water and Moisture -
The appliance should not be used near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
6.
Carts and Stands -
The appliance should be used only with a cart or stand that is recommended by the
manufacturer.
6A.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to overturn.
7.
Wall or Ceiling Mounting -
The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8.
Ventilation -
The appliance should be situated so that its location or position does not interfere
with its proper ventilation. For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings; or, placed in a built-in
installation, such as a book case or cabinet, that may impede the flow of air through the ventilation openings.
9.
Heat -
The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
10. Power Sources -
The appliance should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
11. Grounding or Polarization -
Precautions should be taken so that the grounding or polarization means of an
appliance are not defeated.
12. Power-Cord Protection -
Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
13. Cleaning -
The appliance should be cleaned only as recommended by the manufacturer.
14. Power Lines -
An outdoor antenna should be located
away from power lines.
15. Outdoor Antenna Grounding -
If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built up static charges. Section 810
of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding
of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure 1.
16. Non-use Periods -
The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
17. Object and Liquid Entry -
Care should be taken so that
objects do not fall, and liquids are not spilled, into the enclosure through openings.
18. Damage Requiring Service -
The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
19. Servicing -
The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
