Ventura DLB 410, Руководство пользователя, Страница: 17 / 19

16
Collision shock absorber
Check the spring lubrication, to maintain correct operation.
Before putting the machine to rest for long periods it is opportune to make as follows:
- carefully wash the machine in all parts;
-
make a general control watching the car in order to individualise possible structural lesions, to notice possible
deep abra- sions on the painting, to verify that the original safety pictograms are present in their positions, that its are entire and legible;
- In case of lesions, abrasions or damages, handle the opportune reparations: in case of necessity, immediately
replace the pictograms or the parts of the machine damaged;
- grease all the mechanical organs, the tightening pivots, the attaching head to the cardan shaft junction;
-
insert the terminal part of the hydraulic pipes in the special supports
- put, if it is possible, the machine in a covered place and lean the machine on wood tables or cement
ground in stable position;
- cover the machine with a tarp fastening it.
“Warning!
After completing this operation refit the protective casing blocking the two levers with the correct security screws. ”
Lubrification of the VENTURA gear box
Check the oil level every 50 hours by means of the proper dip stick. Replace the oil after the first 150 hours of work and subse- quently every 1000
hours of work.
In order to do this you will need to unscrew the oil filler plug (B) of the drain tank after having located, under the gear box. The tank has a
capacity of at least 2 litres.
“Warning!
After collection the used oil should be kept in an appropriate container to be disposed of according to the law.
Type of oil: Spartan
220 Quantity: 1.5 litres