Ventura DLB 410 Скачать руководство пользователя страница 3

Страница: 3 / 19

TECHNICAL ASSISTANCE

Sito web:

This manual will provide you with all the information necessary for the use and maintenance of your machine.

The good working and length of life of your machine will depend on its good maintenance and careful use.

Before leaving the pro- duction establishment this particular model underwent a stringent tests in order to guarantee maximum

confidence; it will be necessary, however, to check that during the journey the machine has not undergone any

structural damage that could prejudice its function and its safety.

This manual should be considered an integral part of the machine and should accompany it until its

demolition. In the event of its loss or damage it will be necessary to request a substitute copy from the

VENTURA. The technical information contained in this manual is property of the VENTURA and should be

considered copyright. Any reproduction, even partial of the graphics, text or illustrations is forbidden under the

law. Points discussed in this manual are expressly required by the Directives for machinery CEE 89/392 and successive

modifications and technical data given are provided by the manufacturer at the time of writing. This manual is to be kept

in a place that is accessible for all staff designated to drive and maintain the machine.

N.B. THIS MANUAL MUST ACCOMPANY THE MACHINE IF EVER IT IS RESOLD!

• PREFACE

Содержание DLB 410



















