Vents VUT R 400 TN EH EC A17, Руководство пользователя

Страница: 22 / 32

www.ventilation-system.com
22
Schedule setup
1. Day selection.
Use the button to select the «Day» parameter and then use the
and buttons to select the day for setting the schedule.
2. Setting the schedule recording start time.
Press the button to start setting the first entry. Then use the
and buttons to set the start time for the first entry in hours. After
that press the button to set the time in minutes and then use the
and buttons to set the minute value.
3. Operation mode setup.
After setting the time press the button to set the unit operation
mode. Use the and buttons to select one of the following
modes:
• Disabled
• Ventilation
• Heating
• Cooling
• Auto
• Scheduled operation
4. Selecting a setpoint.
After setting the operation mode press the button to adjust the
setpoint. Use the and buttons to select one of the pre-
programmed setpoints. Open the
«Set time & scheduler»
menu on
page 3/3 to define the setpoints on page 4/4.
5. Setting up other entries.
Other entries are set up similarly.
6. Copying schedule entries to other days.
After programming all the necessary entries they can be copied to
any other day of the week. To do this:
1. Use the
button to set the cursor at
«Copy to»
.
2. Use the and buttons to select a day of the week or all
days.
3. Press
and then use the and buttons to select
«Yes»
.
4. To confirm the copying operation press the button.