Vents VUT R 400 TN EH EC A17, Руководство пользователя

Страница: 16 / 32

www.ventilation-system.com
16
The unit is controlled via the th-Tune or pGD1 control panels.
Button Functions
Operation mode selection: set the operation mode according to
the procedure described on Page 19.
Fan speed selection: set the desired speed level (Low, High or
Medium). While the Automatic Speed Drop mode is enabled
the fan speed is set automatically to maintain the supply air
temperature above the threshold level.
Short pressing: time range on/off.
Activation is confirmed by a pictogram
.
Press and hold (for 3 seconds): access to the clock/time range
setup menu.
Use the knob to choose the necessary option:
setting the
current date/time: starts blinking. Turn the knob to make the
desired setting and press to confirm.
TIMEBAND: setting the time range. Press to set the start time
and the corresponding temperature setpoint for each time range
individually (you may create up to six time ranges).
The pictograms show the current status (i.e. Day/Nigh) and the
presence or absence of inhabitants in the serviced spaces. Press
ESC to exit and return to the standard display mode.
ESC: exit.
After 10 seconds th-Tune returns to the main menu automatically.
Controls unit activation/deactivation; in some menus a short
pressing has the same function as ESC.
PUSH
Enter the desired value and press to confirm.
UNIT CONTROL PANELS
th-Tune
1 3
2
19
18
11 12 13 14 15 16 17
4
6
5
7
8
9
10
Display pictograms:
1. Operation mode.
2. Main field.
3. Fan mode: Manual/Auto.
4. Fan speed indicator.
5. Temperature measurement unit.
6. Lock function.
7. Setpoint value.
8. Relative humidity.
9. Current time range.
10. Day of the week.
11. "Alarm" signal.
12.
Simultaneous blinking with symbol 16 indicates
the Warm-up mode or Compressor Protection
mode .
13. Compressor operation.
14. Defrosting mode signal.
15. Fan operation signal.
16. Operation signal of the electric heating elements.
17. Disabled.
18. Auxiliary field.
19. Unit scheduled operation enabled.
The «Auto» speed becomes available upon entering the Humidity Sensor Feedback mode enabling the unit to increase the air exchange rate
automatically at an increase of the relative humidity (CO2) level in the served air space.
ATTENTION!!! This option is only available with the th-Tune control panel in a special configuration, the external humidity or CO2
control sensor with a 0-10 V output signal to be purchased separately.