Vents VUE 300 H2 MINI EC A14, Руководство пользователя

Страница: 9 / 24

9
www.ventilation-system.com
Mounting using L-shaped mounting brackets with the service panel on the bottom (only for the VUE units)
The unit may be installed close to the ceiling or may be suspended using the threaded rods.
Vibration absorbing rubber
Dowel
Screw
Threaded rod
Nut
Washer
Washer
Vibration absorbing rubber
Nut and lock nut
min 400 mm
min 400 mm
Mounting using L-shaped mounting brackets with the service panel on the left
min 250 mm
min 400 mm
UNIT FLOOR MOUNTING
Install the unit on the pre-mounted floor supports, minimum 150 mm height, to ensure sufficient access for the drain pipe connection
to the U-trap and for condensate drain system installation.
150 mm 150 mm
THE UNIT MUST BE MOUNTED ON A PLANE SURFACE.
MOUNTING OF THE UNIT TO AN UNEVEN SURFACE CAN LEAD TO THE UNIT CASING
DISTORTION AND OPERATION DISTURBANCE.