manualshive.com logo in svg

Vents VUE 250 VB EC Series, Руководство пользователя

Поделиться
Скачать
Vents VUE 250 VB EC Series Скачать руководство пользователя страница 13

13

www.ventilation-system.com

VUT/VUE 250 VB(E) EC L/R

DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE 

OPERATIONS!

Maintenance operations of the unit are required 3-4 times per year. They include general cleaning of the unit and the following operations:

1. Filter maintenance (3-4 times per year).

Dirty filters increase air resistance in the system and reduce supply air volume. The filters require cleaning not less than 3-4 times per year. 
Clean the filter with a vacuum cleaner or replace it with a new one. For new filters contact the Seller. To access the filters, unscrew the 
thumbscrews and remove the service panels.

2. Heat exchanger maintenance (once per year).

Some dust may accumulate on the heat exchanger even in case of regular maintenance of the filters. To maintain high heat recovery 
efficiency, regular cleaning is required. To clean the heat exchanger, remove it from the unit and clean the heat exchanger by using 
compressed air or a vacuum cleaner. Remove the service panel and take it out of the unit for the heat exchanger service operations.

3. Fan maintenance (once per year).

Even in case of regular maintenance of the filters, some dust may accumulate inside the fans and reduce the fan performance and supply 
air flow. Fans should be cleaned selected by the service technician.

TECHNICAL MAINTENANCE

Содержание VUE 250 VB EC Series





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды