Vents PU SENS 01 A11, Руководство пользователя

Страница: 14 / 24

14
PU SENS 01
www.ventilation-system.com
14. Humidity setting
50
•
Select the
HUMIDITY SETTING
item in the Engineering menu and press
ENTER
.
•
Then select the humidity control location:
DUCT
— the humidity level is controlled in the extract duct
upstream of the heat exchanger.
Make sure that a duct humidity sensor is included in the scope of delivery
to control duct humidity.
ROOM
— the humidity level is controlled in the room where the
control panel is installed.
The control panel is equipped with a humidity sensor.
•
Then use or to set the desired humidity level.
•
Press
ENTER
to confirm.
•
To return to the Engineering menu without saving changes press
EXIT
.
In the HUMIDITY CONTROL mode the minimum air flow is equal to the air
flow at the low speed.
15. Error control
•
To receive information regarding the last error select ERROR CONTROL
submenu from the Engineering menu and press
ENTER
.
•
The display shows the error date and code.
•
To return to the Engineering menu press
EXIT
.
•
Errors description is stated in the respective table below.
All manuals and user guides at all-guides.com