background image

15

Connection to the power mains with voltage in excess of the figures given in the User's 
Operation Manual;
Voltage surges in the power mains resulting in product failure;
Product repair by the user;
Product repair by a third party without Manufacturer's permission;
Expiration of the product warranty term (service life);
Violation of the prescribed product transportation regulations which prevent product damage, 
spoilage and/or destruction by the Customer;
Violation of product storage regulations by the Customer';
Wrongful acts against the product committed by third persons;
Circumstances of insuperable force (i.e. fire, flood,earthquake, hostilities of any kind, siege);
Absence of seals if such are provided by the User's Operation Manual or its substitute;
Missing warranty card; 
Missing payment document certifying the purchase with a statement of purchase date.

The Manufacturer shall be liable only for the defects which have arisen through its fault prior 
to product delivery to the user. 

However, the Manufacturer shall not be liable for any defects which have arisen following the 
product delivery to the user and have resulted from violation of product transportation, storage,
 installation and operation regulation by the user, any acts of third parties, accident or circumstance 
of insuperable force. 

The manufacturer shall not be liable for any injuries of individuals and damage of their property 
resulting from violation of the User's Operation Manual or its substitute by the user due to misuse 
or failure to follow any warnings or any other information contained in the User's Operation Manual 
or its substitute by the user, or any violation of product transportation, storage, installation, 
technical maintenance and operation regulations by the user.

VN

VN

Содержание KP 80









































Отзывы: