Vents EH-17, Инструкция по установке

Страница: 2 / 4

2
EH-17
www.ventilation-system.com
OVERALL DIMENSIONS
OUTER VENTILATION HOOD MOUNTING
1. Insert the air duct from indoor to protrude from outside on the
outer wall surface. Cut the air duct excess and a stream spreader
with a hack saw or with any other suitable tool.
WARNING! If the mounting place is located at high altitude,
please refer to a mounting.
(
1
/
8
’’)
min 3 mm min 3 mm
The outer ventilation hood is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside.
PURPOSE
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT
THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
ACCESS BY UNATTENDED CHILDREN.
øD
øD1
A B
A1
H1
H
Model
Dimensions [mm]
Ø D Ø D1 A A1 B H H1
EH-17
106 (4
3
/
16
") 164 (6
7
/
16
") 212 (8
3
/
8
") 160 (6
5
/
16
") 60 (2
3
/
8
") 260 (10
1
/
4
") 160 (6
5
/
16
")