www.ventsus.com
MIU_02_LD-02
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: [email protected]
S1
1
12
S1
Mounting steps:
Step 1 - Cut off power supply and make sure that the power is disconnected
3.
4.
5.
6.
7.
8.
9.
10.
Step 2 -Disconnect the front panel from the fan. Then remove the cover that covers
the control board (Fig. 5).
Step 3 - Mark and bore the fastening holes and install the fan (Fig. 6-8).
Step 4 - Install the front panel (Fig. 9) and the decorative panel on the fan casing.
Step 5 - Provide power supply to the fan (Fig. 10).
Connect the fan to power supply in compliance with the wiring diagram (Fig. 2).
