manualshive.com logo in svg

Ventrac LE3200, Руководство оператора

Поделиться
Скачать
Ventrac LE3200 Скачать руководство пользователя страница 15

SAFETY

Safety - 15

General Safety Procedures

for Ventrac Power Units, Attachments, & Accessories

Hydraulic Safety

• 

Make sure all hydraulic connections are tight and all hydraulic hoses and tubes are in good condition. 
Repair any leaks and replace any damaged or deteriorated hoses or tubes before starting the machine.

• 

Hydraulic leaks can occur under high pressure. Hydraulic leaks require special care and attention.

• 

Use a piece of cardboard and a magnifying glass to locate sus-
pected hydraulic leaks.

• 

Keep body and hands away from pinhole leaks 
or nozzles that eject high pressure hydraulic 
fl uid. Hydraulic fl uid escaping under high pres-
sure can penetrate the skin causing serious 
injury. If hydraulic fl uid is injected into skin, seek 
immediate medical attention.

• 

Hydraulic system may contain stored energy. Before performing maintenance or repairs on the hydraulic 
system, remove attachments, engage parking brake, disengage weight transfer system (if equipped), shut 
off engine, and remove ignition key. To relieve pressure on the auxiliary hydraulic system, shut off the power 
unit engine and move the secondary S.D.L.A. lever left and right before disconnecting the auxiliary hydraulic 
quick couplers.

• 

Dispose of all fl uids in accordance with local laws.

• 

Power unit hydraulic system may contain stored energy. Before performing maintenance or repairs on 
the  attachment hydraulic system, remove attachments, engage parking brake, disengage weight trans-
fer system, shut off engine, and remove ignition key.

• 

Weight transfer springs may contain stored energy. Always disengage the weight transfer system before 
performing maintenance or repairs on the weight transfer system, the front hitch, or the lift hydraulics.

Operator Platform Access

• 

The operator platform is to be accessed from the left side of the power unit. Mounting and dismounting 
the 3200 should only be done from this side.

The engine exhaust from this product contains 
chemicals known to the State of California to cause 
cancer, birth defects or other reproductive harm.

CALIFORNIA PROPOSITION 65 

Diesel Exhaust Warning

Diesel engine exhaust and some of it’s 
constituents are known to the State of 
California to cause cancer, birth defects or 
other reproductive harm.

CALIFORNIA PROPOSITION 65 

Battery Warning

Battery posts, terminals, and related accessories contain lead and lead 

compounds, chemicals known to the State of California to cause cancer 

and reproductive harm. Wash hands after handling!

LE3200 Safety Procedures

Содержание LE3200




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды