Ventrac KH500 Versa-Loader Скачать руководство пользователя | Manualshive

Страница: 5 / 41

background image

Introduction - 5

INTRODUCTION

Product Description

Accessories

Item Description

Part Num

ber

Pallet Fork

39.55630

Rear Weight Bar (receiver mount)

70.4144

3-N-1 Hitch (for 3-point hitch)

39.56114

The Ventrac KH500 versa-loader is designed and built with all steel construction, making it strong and

rugged. The versa-loader is equipped with a 5 cubic foot (.14 cubic meters) bucket and is capable of lifting

up to 500 pounds (227 kg) over 6 feet (183 cm) high. The versa-loader can be attached or detached within

minutes without tools or heavy lifting.

The loader functions are controlled using a joystick hydraulic valve. An optional speed and direction foot

pedal control can be installed on the power unit to free both hands for steering the power unit and control-

ling the loader functions. Refer to your power unit operator’s manual for the proper foot pedal option for

your power unit model.

Why Do I Need an Operator’s Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely

operate, maintain, and service your machine. It is divided into sections for convenient reference of the

appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-

ing the operator’s manual will help you become familiar with each specific piece of equipment. Under

-

standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the

equipment. Keep this manual with the machine at all times. The manual should remain with the machine

even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-

tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both

the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine

while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual

may result in personal injury and/or damage to the equipment.

V

enture Products Inc. is pleased to provide you with your new

Ventrac KH500 versa-loader! We hope that Ventrac equip-

ment will provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you

versatility

as you use your KH500 versa-loader. Please visit our

website, or contact your authorized Ventrac dealer for a com-

plete list of items available for your new KH500 versa-loader.

«
...
3
4
5
6
7
...
»

Содержание KH500 Versa-Loader










































Отзывы:

Нет отзывов

Похожие инструкции для KH500 Versa-Loader

Бренд: Bush Hog Страницы: 96

Бренд: Kubota Страницы: 134

Бренд: Kubota Страницы: 134

Бренд: Kubota Страницы: 138

Бренд: Kubota Страницы: 144

Бренд: Kubota Страницы: 168

Бренд: Kubota Страницы: 194

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды