manualshive.com logo in svg

Ventrac ED202, Руководство оператора и список запасных частей

Поделиться
Скачать
Ventrac ED202 Скачать руководство пользователя страница 5

Introduction - 5

INTRODUCTION

INTRODUCTION

Product Description

Accessories

Item Description

Part Num

ber

Blower Kit (4000 series power units only)

70.8020

Ventrac weight (maximum of three)

47.0115

Flat Free Tire.Wheel Assembly

53.0148

The Ventrac ED202 edger is designed for the sole purpose of edging along sidewalks, curbs, and cart 

paths, as well as edging and maintaining flower and mulch beds. Edging can be done on either the right or 

left side of the power unit per the operator’s choice. The cutting disc can be reversed for bed shaping.

The multi-position swivel wheel can be adjusted to various heights to follow a variety of terrain.

For edging in hard ground, three 42 pound (19 kg) weights may be added to the weight bar on the disc guard.

For maximum productivity and performance, a bidirectional blower can be added when using the edger with 

a 4000 series power unit. This allows the operator to edge and blow debris from the area being edged in one 

efficient pass. The blower has multiple positions including right, left, or down which adds to its versatility.

Why Do I Need an Operator’s Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely 

operate, maintain, and service your machine. It is divided into sections for convenient reference of the 

appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-

ing the operator’s manual will help you become familiar with each specific piece of equipment. Under

-

standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the 

equipment. Keep this manual with the machine at all times. The manual should remain with the machine 

even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-

tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both 

the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine 

while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual 

may result in personal injury and/or damage to the equipment.

V

enture Products Inc. is pleased to provide you with your new 

Ventrac ED202 edger! We hope that Ventrac equipment will 

provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you 

versatility

 as you use your ED202. Please visit our website, or 

contact your authorized Ventrac dealer for a complete list of 

items available for your new ED202 edger.

Содержание ED202










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды