Ventrac Collection Vacuum RV600, Руководство оператора и чертежи запасных частей

Страница: 18 / 73

GENERAL OPERATION
Operation - 18
6. Connect the battery cable to the quick connect
plug located to the left of the hydraulic couplers.
7. Rotate the docking station handle (G) to release
the collection system from the docking station.
8.
G G
Latched Latched
Released Released
Connect the mower collection boot to the mower
deck. (May require the removal of the flexible
discharge chute.) Install the keeper pins (H) to
secure the collection boot to the mower deck.
H H
H H
9. Connect the suction hose to the collection boot.
Fasten the clamp in place to secure the suction
hose to the collection boot.
I I
J J
K K
Detaching - Pin Connect Hitch System
1. Ensure the collection bin is empty, the collection
bin door is closed and latched, and the collection
bin is lowered completely to the down position.
2.
Always empty the collection bin after use. Never
store the collection system with material in the
collection bin.
Position the tractor so the collection system is at
the desired location for detachment.
3. Place the tractor in park and shut off the
engine. Move the lift and door hydraulic levers
to relieve pressure that may be present in the
hydraulic system.
4. Install the caster wheel stands (one on each side
of the collection system). Turn the handles until
some of the weight is on the caster wheel stands
and the collection system begins to rise.
5. Disconnect the collection boot from
the mower deck (if attached).
6. Disconnect the four hydraulic hoses
and store them in the hose holder.
7. Disconnect the battery cable.
DANGER