2.4 Powering the VDR-130 On / Off
2.4.1.1 Power On / Recording
VDR will automatically power and
record on when vehicle powers on.
Red blinking dot displayed on the top
left corner of screen
To turn off the VDR power, press the
button in the center of camera
2.4.1.2 Stop Video Recording
To stop recording, press the
OK
button
once. Red blinking dot will stop.
To resume recording press
OK
button
again
2.4.1.4 Enable / Disable Audio Recording
Press the arrow button to Enable / Disable audio
recording while VDR is recording Video. Microphone icon
will display
3. Settings Menu
Settings 1 - Pg. 1
VDR supports a wide range of setting configuration based
on individual preference.
08
09
2.4.1.5 Enter Menu Setting Mode
Stop recording by pressing the
OK
button once.
Red blinking dot will stop
Press
M
button to enter 1
st
page of setting
menu, press
M
again for 2
nd
page of settings
Settings 1 – Pg. 1 Cont’d
Settings 2 - Pg. 1
Settings 2 – Pg. 1 Cont’d
2.4.1.2 Motion Recording
Motion recording can be enabled in system setting if the
VDR is constantly powered by vehicle. VDR will start to
record when motion is activated. To stop Motion recording,
press OK while VDR is recording in this mode.
NOTE
: Pressing OK to stop motion recording will disable the
feature in system setting. Must re-enable it in the settings
menu to activate feature
