Ventis HES240 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 56

background image

Page 7

Installation and Operation Manual - HES 240

ENGLISH

PART A - OPERATION AND MAINTENANCE

1. Safety Information

• This stove has been tested for use with an open door in conjunction with a fire screen, sold

separately. The door may be opened, or fire screen removed only during lighting procedures or
reloading. Always close the door or put back on the fire screen after ignition. Do not leave the stove
unattended when the door is opened with or without the fire screen.

•

WARNING : OPERATE ONLY WITH THE DOOR FULLY CLOSED OR FULLY OPEN WITH THE
FIRE SCREEN IN PLACE. IF THE DOOR IS LEFT PARTLY OPEN, GAS AND FLAME MAY BE
DRAWN OUT OF THE OPENING, CREATING RISKS FROM BOTH FIRE AND SMOKE.

•

HOT WHILE IN OPERATION, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT
MAY CAUSE SKIN BURNS. GLOVES MAY BE NEEDED FOR THE STOVE OPERATION.

• Using a stove with cracked or broken components, such as glass, firebricks or baffle may produce

an unsafe condition and may damage the stove.

• Open the air control fully before opening the loading door.

•

NEVER USE GASOLINE, LANTERN FUEL (NAPHTHA), FUEL OIL, MOTOR OIL, KEROSENE,
CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS OR AEROSOLS TO START A FIRE IN
THIS STOVE. KEEP ALL SUCH LIQUIDS OR AEROSOLS WELL AWAY FROM THE STOVE
WHILE IT IS IN USE.

• Do not store fuel within heater minimum installation clearances.

• Burn only seasoned natural firewood.

• This appliance should always be maintained and operated in accordance with these instructions.

• Do not elevate the fire by using a grate.

• Do not use makeshift materials or make any compromises when installing this appliance.

• This wood heater needs periodic inspection and repairs for the proper operation. It is against

federal regulations to operate this wood heater in a manner inconsistent with operating instructions
in this manual.

• A smoke detector, a carbon monoxide detector and a fire extinguisher should be installed in the

house. The location of the fire extinguisher should be known by all family members.

This product can expose you to chemicals including carbon monoxide, which is
known to the State of California to cause cancer, birth defects or other reproductive
harm. For more information go to

www.P65warnings.ca.gov/

«
...
5
6
7
8
9
...
»

Содержание HES240

























































Отзывы:

Нет отзывов

Похожие инструкции для HES240

Бренд: RAIS Страницы: 56

Бренд: RAIS Страницы: 81

Бренд: IFYIL Страницы: 80

THERMO VERONA DSA

Бренд: Broseley Страницы: 18

Бренд: Piazzetta Страницы: 70

Studio Stove 14

Бренд: Warmington Страницы: 16

Бренд: Desa Страницы: 28

Бренд: Country Flame Страницы: 57

CHELSEA 6909895

Бренд: Clarke Страницы: 28

Бренд: U.S. Range Страницы: 2

Бренд: THERMOROSSI Страницы: 32

COMPACT S22 EVO5

Бренд: THERMOROSSI Страницы: 59

Бренд: EdilKamin Страницы: 32

Бренд: EdilKamin Страницы: 72

Бренд: EdilKamin Страницы: 179

Бренд: Drolet Страницы: 42

Euromax EP00070

Бренд: Enerzone Страницы: 100

Бренд: Haas+Sohn Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды