background image

Meditell 2 User Manual VI49.2 

 

 

- 9 - 

 

5.0 Routine Testing and Maintenance. 

It is essential that the Meditell 2 system is regularly tested and maintained properly to ensure consistent and 
reliable operation. 
 

5.1 Routine Testing 

It is important that the entire Meditell 2 system is regularly tested. 
 
Once per month each “Standard Call ” device and “Priority Call” Device should be activated to ensure correct 
operation. 
 
It is good practise to test the “Reset” devices regularly to allow easy system resetting when required. 
 
The ECU Front mounted “Reset / Mute” button can be used to perform a simple self test of the system 
warning devices. See Section 3.5 for details. 
 
The times mentioned above should be considered as minimum test periods, more frequent tests are 
preferable. 
 

5.2 Routine Battery Maintenance 

If the system has a battery back up unit installed, It is important to regularly test it. 
 
Every 6 months 

the mains power should be turned off and a “Call Alarm” activation generated, the system 

“Warning Devices” should sound and illuminate at similar sound and light level as when then the system is 
operating from the mains supply. 
 
The back up batteries should be replaced every 4 years. 
 
 
 
 
 
 
 
 
 
 

Содержание Meditell 2













Отзывы: