Step A/ Connect the EARTH wire to the terminal port marked “ ”on the terminal block
mounting bracket (Fig. 8a).
Step B/ Connect the supply LIVE wire to the wall controller terminal port labelled
"TO 240V/50Hz". (Fig. 8b).
Step C/ Connect a wire from the Fan Live "L" from the terminal block mounting bracket
(Fig. 8a), to the terminal port labelled "FOR FAN-L" on the wall controller (Fig. 8b).
Step D/ Connect a wire from the Light Live
“ ”
from the terminal mounting bracket (Fig. 8a),
to the terminal port labelled "FOR LIGHT-L" on the wall controller (Fig. 8b).
Note
: The fan light wiring is only applicable to fan models with a light kit.
Step F/ Connect the supply Neutral wire to the terminal port marked "N" on the terminal block
mounting bracket (Fig. 8a).
Once all the above steps have been followed, you are now ready to restore the mains power
supply. Make sure there is nobody near or under the fan, then turn ON the fan (and light switch
if included in your model) to test.
If you notice any problems, please recheck the installation and wiring procedures above, as
well as the "Troubleshooting Checklist' on page11.
8
-
The wall control shall fit into existing gang block or wall plate. If you do not flush mount
the control, use a standard single gang mounting block;
-
Careful not to mix the supply live and the fan live connection. Reverse connection of
the speed control will affect the correct operation of the fan;
-
After the wiring connections are completed, ensure that all wires are arranged in a tidy
manner, and make sure the ball sits well into the bracket, as it is important to reduce your
fan from wobbling.
8. REVERSING SWITCH
Switch shall be in the
“
summer” position to make the fan rotate in the anticlockwise direction
during summer season, and in the
“
winter” position to make the fan rotate clockwise direction
during winter season.
Warning
: For your safety, before changing between
“
winter” or
“
summer” position, make
sure the fan is switched OFF and the fan blades have come to a complete stop.
Warmer Weather
–
Have the airflow directed downwards.
Cooler Weather
–
Have the airflow directed upwards.
SUMMER
WINTER
DOWNDRAFT
UPDRAFT
Clockwise Rotation
Counter Clockwise rotation
Summer
:
Air
is
Blown downwards
,
producing
cool breeze
Winter
:
Warm
air
naturally
rises
towards
the
ceiling. The upward
airflow pushes this warm air away
from the ceiling, circulating it
within the room
