IMPORTANT INFORMATION
PARTS IDENTIFICATION
DIMENSIONS
WARNING: FOR YOUR SAFETY, ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A
LICENSED ELECTRICIAN.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions on the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Fan must be installed at least 120cm above any hotplate, and must have at least 50cm
clearance at the rear of the blades.
Minimum installation height is 2.1metres from the floor to the bottom of the exhaust fan.
If the room where the fan is to be installed already contains a stove, water heater or a gas
fire, it is essential to ensure that the air supply to the room is enough for both the fan and the
combustion appliance.
Please check that the appliance has not been damaged in transit before installation.
Ensure the electrical specifications label corresponds to your electrical supply correctly.
MODEL
A
B
C
D
Cut-Out
Hole Size
VSLF100
158 x 158mm
21
58
98
Ø98mm
VSLF125
180 x 180mm
21
71
116
Ø116mm
VSLF150
209 x 209mm
21
82
148
Ø148mm
