J.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
K.
Young children should be supervised to ensure that
they do not play with the appliance.
DESCRIPTION
The Response fan is a continuously running extract fan for kitchens,
utility rooms, bathrooms and toilets.
The product incorporates an airflow detection system that detects the
installation duct resistance and maintains the correct fan speed to
achieve the preset extract flow rate (model dependant).
The incorporated LED display allows the installer to configure the fan to
suit its installation. The display is also used to show the day logger and
power run meter.
The fan can be wall, window or panel/ceiling mounted.
ACCESSORIES
(not supplied)
WALL FITTING KIT
- A range of white (stock ref. 254102) or
brown (stock ref. 254100) 100mm wall kits are available for
installing into most walls using telescopic liners supplied.
WINDOW KIT
stock ref. 407927
CEILING KIT
stock ref. 407928
150mm COVERSION KIT
stock ref. 408680
Decoration Frame
stock ref. 474041
A. INSTALLATION
SITING THE TRANSFORMER (SELV Models only)
1. The transformer must not be installed in a shower cubicle or
enclosure. It must be sited away from direct sources of water spray
and out of reach (1.5m) of a person using a fixed bath or shower.
2.
Site away from direct sources of heat. Ambient temperature range
0 ºC to 40ºC. Do not site in an area containing excessive levels of
grease.
3.
Decide where to site the transformer and fan and work out the
required cable runs.