6
In many installations where condensation is a severe problem; it is recommended to run the fan at purge
speed for a couple of weeks to ventilate the house thoroughly. This can be achieved by utilizing the LS
input option, whereby the unit will run on Purge setting until the LS signal is terminated. To achieve this,
connect the LS core of the integral mains flying lead to an LS input.
It is the responsibility of the installer to ensure that appropriate speeds are selected.
F. SERVICING AND MAINTENANCE
The fan motor uses sealed ball bearings, and does not require further lubrication.
Apart from filter change the Lo-Carbon Pozidry Compact contains no user serviceable parts.
Under normal conditions; i.e. away from main roads and industrial areas it is recommended that the filter is checked
annually and cleaned or replaced as necessary. Otherwise change as required.
The filter may be gently cleaned with a vacuum cleaner or washed in a soapy water solution and allowed to air dry
before re-fitting. Do not dry the filter in a tumble dryer.
Spare filters are available from Vent-Axia Sales Centres.
Spares
Stock Reference
Filter
447381
Front cover
447383
Control PCB
447385
PSU PCB
447386
Motor/impeller
447384
Heating element (integral heater version 444767 only)
447391
Accessories
Elbow - 90 degree bend, (100 dia.)
400752
Duct - 2.0 m length, (100 dia.)
5108250
Wall fitting kit - white
254102
Wall fitting kit - brown
254100
Quick Fit 100mm wall grille - white
563521
Quick Fit 100mm wall grille - brown
563541
Quick Fit 100mm termination
563535A
Air replacement set (door grille) - ivory
561401
Air replacement set (door grille) - brown
561400
Installation Packs
Stock Reference: -
453546
453547
453548
Quick-fit grill, white
1
1
1
Wall fitting kit, brown
1
1
1
HR 70WH Rnd-Rect Ad
1
3
3
HR 060WH Vert 90
°
bend
2
2
2
Ind 040WH Elbow/Spgt
1
1
1
HR 010WH 1m Flat Chnl
1
2
2
HR 015WH 1.5m Flat Chnl
1
2
2
HR 020WH Connector
1
4
4
HR 050WH Horiz 90
°
bend
-
-
2
HR 122-H Chnl Clip
4
6
2