Vent-Axia 3 in 1, Руководство пользователя

Страница: 10 / 18

-8
REMOTE CONTROLLER FUNCTIONS
6. BLANK:
Not used on this unit.
7. SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function
is available in COOL or DRY mode to maintain the most comfortable temperature for you.
8. TIMER:
Press this button to initiate auto-on/auto-off timer. To cancel auto-timer program, press this button twice.
9. CHANGING THE DISPLAY FROM °C TO °F
With the unit OFF, press "MODE" and "
-
" buttons simultaneously to switch between °C and °F .
To change back press “MODE” and “-“ buttons again.
Replacement of Batteries
1. Remove the battery cover plate from the rear of the remote controller.
(As shown in the figure)
2. Take out the old batteries.
3. Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
4. Reinstall the battery cover plate.
★
Notes:
●
When replacing the batteries, do not use old or different types of batteries.
● If the remote controller is not to be used for a long period of time,
please remove batteries to prevent the batteries from leaking.
●
The controller should only be used within its receiving range.
●
The controller when used should be kept 1m away from the TV set or
stereo sound sets.
●
If the remote controller does not operate normally, please take the batteries
out and reinsert them after 30 seconds. If it still can't operate properly,
replace the batteries.
Fig.1
Fig.2