Page 19
Trouble Shooting
SYMPTOM:
The slide switches on the thermostat
are very difficult to move.
CAUSE:
The backplate of the thermostat is
screwed too tightly into a wall that is not
perfectly flat.
REMEDY:
Loosen the screws holding the
thermostat into the wall.
SYMPTOM:
The Air Conditioning does not
attempt to turn on.
CAUSE:
The cooling setpoint is set too
high, the Mode Switch is not set for
Cool, or the batteries are too weak.
REMEDY:
Consult the Normal Operation
section in the Owner’s Manual to:
L
ower the cooling setpoint.
C
orrect the Mode Switch position.
R
eplace the batteries.
SYMPTOM:
The fan does not turn on even though
the compressor has energized.
CAUSE:
The Fan Switch is not completely in the
On or Auto position.
REMEDY:
Slide the Fan Switch firmly into the On
or Auto position.
INSTALLATION INSTRUCTIONS
T1035
Su
PM
I2:00
:
Su
PM
I2:00
:
Su
PM
I2:00
:
