Electric TV Lift, TS700A & TS1000A
6
4. Installation.
1) Remove all contents from packaging and compare with parts list.
2) Place the lift unit (#1) on e.g. the back panel of cabinet in a location that will allow full
up and down movement of the lift.
3) Fasten the unit securely to the cabinet. Screws must be appropriate for the material
being used.
4) Connect the plugs from lift unit (#1) and power supply (#10) to R.F. Module (#5).
Please also refer to the separate user instruction for the remote unit, next page.
5) Mount rocker switch (#9) on wanted location by cutting a hole and pressing the switch
into place. Secure excess wire to keep away from moving parts.
6) Plug the power cord into wall outlet and test the lift. If the unit doesn’t work, check all
connections and retry. If still not working, refer to trouble shooting guide on
www.venset.com
, click “support”.
Helpful hint: Mount TV lift and electronics to plywood panel and attach to inside back of
cabinet using appropriate number of screws. This allows all components to be removed from
the cabinet if necessary. If this is not possible, create an access panel to the electronics.
