3
0697
venompower.com
3. NOTES ON THE CYCLE AND STORAGE MODES
This charger has a maximum discharge amperage of 0.65A
per channel. For this reason it is recommended that the
CYCLE or STORE modes only be used when the Phantom 4
battery has been discharged 50% or less. This is indicated
when no more than two of the four LEDs lights on the
Phantom 4 battery are illuminated. If initiating a CYCLE or
STORE mode process with a fully charged battery, the result
will be a lengthy discharge time. (Up to 8 hours for a CYCLE, 5
hours for a STORAGE charge.)
STORE:
(Recommended if the battery will be idle more than 21 days)
Power on the battery by pressing the power button on the
front of the battery once, then quickly press the button a
second time, holding it for up to 5 seconds until the lights
on the battery illuminate.
Place the battery in one of the four charging bays ensuring
the power button on the battery is facing the back of the
charger.
Press the “STORE” button that corresponds to that battery
bay.
When a storage charge is initiated, the RED LED light on
the charger will begin to flash.
1)
2)
3)
4)
