INST
ALLA
TION MANUAL
INST
ALLA
TION
10
NON-DUCTED INSTALLATION ONLY
7 ]
Remove 3 screws retaining the recirculation cover plate to the hood. Discard this plate with
its screws.
Peel off and discard the membrane covering the recirculation grille, ensuring
the openings are totally cleare
d.
RECIRCULATION
COVER PLATE
SCREWS
6 ]
Remove Electrical Power Cable Knockout from top (vertical wiring) or back (horizontal wiring)
of hood. For knockout removed from back of hood, install an appropriate strain relief,
1/2” diameter (not included). For knockout removed from top of hood, the strain relief will be
installed later.
ELECTRICAL
POWER CABLE
KNOCKOUT
5 ]
Remove the parts bag, taped on the inner back of hood, near the left corner. Remove the EZ1
brackets from inside the hood by cutting off the tie wrap. Discard the tie wrap
.
EZ1 BRACKETS
PARTS BAG LOCATION
