-4-
3. PREPARE INSTALLATION
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must
be plugged into an outlet that is properly installed and grounded.
Set the electrical power supply within the space covered by the decorative flue.
Position the outlet offset so that the power cord will not interfere with the round
duct. Place the outlet at a maximum distance of 33
7
/
16
” from where the cord exits
from the hood (see illustration alongside). Make sure this does not interfere with
a mounting bracket fastening area or with the decorative flue (where the flue
touches the wall).
4. WIRING INSTALLATION
Electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. This range
hood must be properly grounded. Turn off electrical power at service entrance before wiring.
HE00
8
6
Improper grounding can result in a risk of electric shock. Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an
extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
33
7
⁄
16
”
MAX
.
Make sure that the following items are included:
1 - Hood
1 - Decorative Flue Assembly (lower and upper flues)
1 - Lower Flue Mounting Bracket
1 - Hood Mounting Bracket
1 - Upper Flue Mounting Bracket
1 - Parts Bag containing:
8 - No. 8 x 7/16” Mounting Screws
7 - No. 8 x 1½” Mounting Screws
9 - Drywall Anchors
2 - Washers
2 - No. 8 x 1¼” Mounting Screws
4 - Aesthetic Washers
4 - M4 x 0.7” Mechanical Flat Head Screws
NOTE: If need be, discard extra screws.
2 - Aluminum Grease Filters
1 - 6” Round Adapter/Damper
1 - Curved glass (VJ603302SS only) or stainless steel plate (VJ604302SS only)
1 - Installation Manual
HR00
3
1A
D
ECORATIVE
FLUE
L
OWER
FLUE
MOUNTING
BRACKET
H
OOD
MOUNTING
BRACKET
U
PPER
FLUE
MOUNTING
BRACKET
6
”
R
OUND
ADAPTER
/
DAMPER
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
WARNING
!
WARNING
!
