3
A
BOUT
THESE
U
NITS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSON(S), OBSERVE THE FOLLOWING:
1. This unit is intented for residential installation only.
2. Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction codes and standards.
3. This unit is not designed to provide combustion and/or dilution air for
fuel-burning appliances.
4. Do not install in a cooking area or connect directly to an appliance.
5. Before servicing or cleaning the unit, disconnect power from HVAC
system.
6. When cutting or drilling into wall or ceiling, do not damage electrical
wiring or other hidden utilities.
7. Do not use FAE125M and VFAE125M units with any solid-state speed
control device. Use only with Dehumidistat wall control provided with
the unit.
8. This unit must be installed in a weatherized location, out of direct
sunlight and protected from the elements.
9. Use this unit only in the manner intended by the manufacturer. If you
have questions, contact the manufacturer at the telephone number
listed in the warranty.
10. When performing installation, servicing or cleaning the unit, it is
recommended to wear safety glasses and gloves.
11. Servicing shall be done by qualified service personnel.
12. When applicable local regulations comprise more restrictive installation
and/or certification requirements, the aforementioned requirements
prevail on those of this document and the installer agrees to conform to
these at his own expenses.
!
CAUTION
1. For general ventilation use only. Do not use to exhaust hazardous or
explosive materials and vapors.
2. Intended for residential installation only in accordance with the
requirements of NFPA 90B and in compliance with all local and national
codes that are applicable.
3. Be sure to duct air outside. Do not intake/exhaust air into spaces within
walls or ceiling or into attics, crawl spaces, or garage.
4. To avoid premature clogged filter, turn OFF the unit during construction
or renovation.
5. Please read the unit specification label on the product for further
information and requirements.
6. At least once a year, the unit mechanical and electronic parts (if need
be) should be inspected by qualified service personnel.
7. The FAE125M or VFAE125M must be connected to a 24-volt class 2
circuit only.