Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory
installed) from both studs and set aside.
If need be, remove current glass panel
retaining nuts from both studs. Discard
glass panel and nuts.
Insert new glass panel studs in
appropriate hood holes.
NOTE:
For CIS700 Series, install
the glass panel with the control
pictogram on the front of the
hood.
While holding glass panel, pre-tighten
previously removed nuts by hand. Ensure
glass panel is centered.
Then, using a 3/8" socket, tighten nuts
completely.
Repeat steps
and
for the second
glass panel installation.
HD0439
G
LASS
P
ANEL
S
TUD
N
UT
Reinstall electrical compartment cover and baffle filters.
I
F
THE
RANGE
HOOD
IS
NOT
INSTALLED
YET
,
REFER
TO
STEP
4
OF
THE
HOOD
INSTALLATION
GUIDE
.
I
F
THE
RANGE
HOOD
IS
ALREADY
INSTALLED
,
FOLLOW
THESE
STEPS
:
Remove filters by pushing them
towards the back (opposite control
side) of the hood and tilting them down.
Set the filters aside.
HO0251
Using a Robertson or a Phillips no. 2
screwdriver, remove the 5 electrical
compartment cover retaining screws.
Set cover and screws aside.
HD0560
S
CREW
LOCATIONS
- 6 -
CC700
AND
CIS700 S
ERIES
(
CONT
’
D
)
IB700, IC700
AND
IC700ES S
ERIES
