If need be, remove current glass panel
retaining nuts from both studs. Discard
glass panel and nuts.
Insert new glass panel studs in
appropriate hood holes (some parts not
illustrated to ease understanding).
NOTE: Install the glass panel with the
control pictogram on the front of
the hood.
While holding glass panel, pre-tighten
previously removed nuts by hand. Ensure
glass panel is centered.
Then, using a 3/8" socket, tighten nuts
completely.
HD0438
G
LASS
P
ANEL
S
TUD
N
UT
Reinstall filters.
- 5 -
I
F
THE
RANGE
HOOD
IS
NOT
INSTALLED
YET
,
REFER
TO
STEP
4 (CC700 S
ERIES
)
OR
STEP
6 (CIS700 S
ERIES
)
OF
THE
HOOD
INSTALLATION
GUIDE
.
I
F
THE
RANGE
HOOD
IS
ALREADY
INSTALLED
,
FOLLOW
THESE
STEPS
:
Remove filters by pushing them
towards the back (opposite control
side) of the hood and tilting them
down. Set the filters aside.
NOTE: CIS700 Series illustrated at
right and below; some details
of your hood may be slightly
different from the ones shown.
Using a Robertson or a Phillips no. 2
screwdriver, remove the 4 electrical
compartment cover retaining screws.
Set cover and screws aside.
HO0190
HD0437
S
CREW
L
OCATIONS
CIC700
AND
IK700 S
ERIES
(
CONT
’
D
)
CC700
AND
CIS700 S
ERIES
