4
1. PREPARE THE INSTALLATION
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories
• Decorative flue assembly (lower and upper flues)
• Hood mounting bracket
• Upper flue mounting bracket
• 2 Thin baffle filters
• 2 Filter knobs with screws, taped inside the hood
• 8” round adapter/damper (for vertical discharge), in a separate box
• 3¼” x 10” adapter/damper (for horizontal discharge)
• Installation manual
• Bag of parts including: 5 no. 8 x 1½” countersunk screws, 8 no. 8 x 3/4” screws, 6 no. 8 x 3/8” screws,
6 drywall anchors, 3 washers, 2 no. 8 x 1/2, 2 neoprenes. If need be, discard extra hardware.
Parts sold separately:
- Duct, elbows, wall and roof caps. Refer to page 3 for a complete list of venting options and model numbers.
- Non-duct kit model no 09025, mandatory for non-ducted installation.
- Optional flue extension for 10-ft. ceilings model no. 09019.
NOTE: During installation, protect countertop and/or cooktop.
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
2. SELECT INSTALLATION TYPE
2.1 N
ON
-D
UCTED
I
NSTALLATION
Non-duct kit model 09025 is required for a non-ducted installation.
2.2 D
UCTED
I
NSTALLATION
Plan where and how the ductwork will be installed.
Install proper-sized ductwork, elbows and roof or wall cap depending on the type of installation. For vertical discharge, use
8” round ductwork and for horizontal discharge use 3¼” x 10” ductwork. Use metal foil duct tape to seal duct joints.
2.3 A
LL
I
NSTALLATIONS
The minimum hood distance above cooktop must not be less than 24” (30” over
a gas range). A maximum of 30” above cooktop is recommended for best
capture of cooking impurities.
Distances over 30” are at the installer and users discretion; providing that ceiling
height and decorative flue length permit allows it.
NOTE: There are 2 different heights for the horizontal ductwork.
Refer to steps 4 and 6 for more details.
8”
ROUND
DUCT
R
OOF
CAP
3¼”
X
10”
DUCT
W
ALL
CAP
H
OOD
D
ECORATIVE
FLUE
HH0134A
R
EFER
TO
CHART
FOR
DISTANCE
ABOVE
COOKING
SURFACE
C
EILING
HEIGHT
M
INIMUM
HOOD
DISTANCE
ABOVE
ELECTRIC
RANGE
COOKTOP
M
INIMUM
HOOD
DISTANCE
ABOVE
GAS
RANGE
COOKTOP
8
FT
.
24
IN
.
30
IN
.
9
FT
.
29½
IN
.
30
IN
.
10
FT
.*
25
IN
.
30
IN
.
* 10-ft. ceilings require flue extension model no. 09019 (sold separately).
