1. Assemble 4 angle brackets to
the ceiling mounting bracket
using at least two no.10-32 x 1/2"
quadrex screws per angle bracket.
NOTES: 1. Do not tighten the
screws yet.
2. Depending on the
height needed (
C
)
(previously determined
in section 4), the
angle brackets
might not touch the
ceiling as illustrated
at right.
2. If need be, assemble a second
set of 4 angle brackets to the
inner side of the upper angle
bracket set according to the
height needed (
C
) (previously
determined in section 4). Use at
least two no. 10-32 x 1/2" quadrex
screws and two no. 10-32 lock nuts
per angle bracket connection.
NOTE: Do not tighten the
screws yet.
F
OR
10-
FT
CEILINGS
:
Both lower and upper flues are
included with the hood, but for
a 10-ft ceiling, discard the
provided upper flue and use
the optional extension flue, part
no. 19325 (sold separately).
4 additional angle brackets and
additional mounting hardware
are included with the optional
extension flue.
If need be, assemble a third set
of 4 angle brackets to the second
angle bracket set according to the
height needed (
C
) (previously
determined in section 4). Use
at least two no. 10-32 x 1/2"
quadrex screws and two no. 10-32
lock nuts per angle bracket.
NOTE: Do not tighten the
screws yet.
3. Attach blower box assembly to
lower angle brackets using at least
two no. 10-32 x 1/2" quadrex
screws per angle bracket.
NOTES: 1. Make sure the blower box bottom is at the desired height (
C
) as previously determined
in section 4.
2. Ensure electrical box is positioned in the back right corner.
HD0444
F
OR
10-
FT
CEILINGS
(
IF NEED BE
)
6. ASSEMBLE ANGLE BRACKETS
F
RONT
OF THE HOOD
ELECTRICAL BOX
- 9 -
