INST
ALLA
TION MANUAL
INST
ALLA
TION
10
B
C
Prepare the Hood
1 ]
If present, remove all protective polyfilm from the hood and/or parts.
2 ]
Remove the adapter/damper from back of hood (see illustration below). Keep the screws for
further use.
3 ]
Using the finger cup, remove the grease filters from the hood by pushing down
and tilting
filters out
.
4 ]
Using a 11/32” nutdriver or socket, remove the lock nut retaining the flange of the right
blower cover plate (shaded part on illustration below) to the inner back of hood (see insets).
Remove the right cover plate retaining screws (7 screws), then set the blower cover along
with its screws and lock nut aside.
1
2
3
4
5
6
7
BACK OF HOOD
LOCK
NUT
2 SCREWS
