19
INSTALLATION
1. Fasten the sounder to the wall.
2. Insert the connection cables through the holes located on the base.
3. If required, modify the default settings by adjusting the dip
switches as indicated in the charts above.
4. Connect the power supply to the control panel.
5. Close the internal and external covers with the screws provided.
WARNING: The power supply must be of SELV type.
NOTE:
to avoid formation of condensation inside the sounder, any air
flow must be avoided. Once the cables have been connected, seal
the hole using some silicone. This operation will prevent the warm
and humid air of the building from forming condensation inside the
sounder during winter time, thus avoiding the risk of malfunctioning.
FIXING HOLES
MADE IN ITALY
1293
Venitem s.r.l. Via del Lavoro, 10 - 30030 Salzano (VE)
17
DoP 1293-CPR-0553
EN54-3
MOSE F24EN - FIRE ALARM SOUNDER
Intended for use in fire detection and fire alarm systems in and around buildings
TYPE B: for outdoor use
Other technical data: see the supplier’s technical dossier.
ESSENTIAL CHARACTERISTICS
PERFORMANCE
Performance under fire conditions
Pass
Operational reliability
Pass
Durability of operational reliability and response delay, temperature resistance
Pass
Durability of operational reliability, humidity resistance
Pass
Durability of operational reliability, shock and vibration resistance
Pass
Durability of operational reliability, corrosion resistance
Pass
Durability of operational reliability, electrical stability
Pass
Durability of operational reliability, resistance to ingress
Pass
Settings and connections on page 23
DoP available on site
www.venitem.com
Содержание HOLA F24EN
