Venini VO5XL, Руководство пользователя

Страница: 8 / 15

Venini VO5XL–VO5XLW 60cm Fan Forced Oven User Manual 15 14 Venini VO5XL–VO5XLW 60cm Fan Forced Oven User Manual
real time (hour, minute) will disappear. After the power is on again, three
“
0
”
and
“
AUTO
”
shows on the screen, the oven will automatically
reset.
3-keys timer procedure baking mode (only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show
“
12:00
”
with the square symbol above
“ ”
;
Press the
“
+
”
or
“
-
”
button will increase or decrease the number until it reaches the right time; after 5 seconds it will start automatically
or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
1. Press the function button repeatedly until the square symbol above the
“ ”
flashes, and press
“
+
”
or
“
-
”
button to set the
time frame baking for;
2. Press the function button repeatedly until the square symbol above the
“ ”
flashes, and press
“
+
”
or
“
-
”
button to set
the time to switch off;
3. Adjusting the constant temperature button and choosing button to set temperature and baking method.
After these setting, the symbols above the
“ ”
and
“ ”
will flash, it indicates the baking procedure of oven has been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
Press the function button repeatedly until the square symbol above
“ ”
flashes, and set the time of baking to 45 minutes;
Press the function button repeatedly until the square symbol above
“ ”
flashed, and set the end time of baking at 14:00.
After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the setting of baking
procedure has been remembered automatically.
When the clock shows at 13:15 (between 14 -15min), the oven will switch on automatically.
During the baking time frame, the square symbol will keep flashing.
When the clock shows14:00, baking will switch off automatically. The alarm will ring, the square symbol will flash, To stop the ringing
press any button.
Semi-automatic setting (set the time of automatic starting and ending)
A. setting the time frame of baking (10 hours longest)
Press the function button repeatedly until the square symbol above
“ ”
, and set the time frame of baking;
Switch on the oven immediately, the square symbol above
“ ”
begins to flash. When the baking is done the square symbol above
“ ”
will flash, and alarm ring, To stop the ringing press any button.
B. setting the end time off baking (23hours and 59minutes longest)
Press the function button repeatedly until the square symbol above
“ ”
flashes, and set the end time of baking;
Switch on the oven immediately, the square symbol above
“ ”
begins to flash. When it reaches the time set, baking procedure will
switch off automatically. The square symbol above
“ ”
flashes, the alarm will ring, the square symbol will flash. To stop the ringing
press any button.
The set baking procedure could be seen by pressing any function button repeatedly at any time, only if the time frame of baking is at
“
0
”
position. By adjusting the end time of baking to the current time, the set baking procedure can be cancelled.
Timer
The longest time frame can be set is 23 hours and 59 minutes. For setting time, press the function button repeatedly until the square
symbol above
“ ”
flashes, and press
“
+
”
or
“
-
”
button until the time supposed shows on the display. After setting, the proper
- In order to set the correct time, press the button first, then + or - button to carry forward or backward the figure until the exact
time shows.
Manual operation setting
Press the button to remove the flashing of
“
AUTO
”
.
If
“
AUTO
”
is flashing (automatic or semi automatic program has been set),press button to remove
“
AUTO
”
and then the manual
operation process is on.
Automatic setting (set the time of full automatic starting and ending)
1.Press button, set roast time;
2.Press button, set roast finish time;
3.Set temperatures and roast modes by turning the thermostat knob and selector knob.
After the above setting,
“
AUTO
”
will be glittering, which means the roast process of the oven is set.
For example: if roast time takes 45 minutes and expect it will end at 14:00.
Press, the roast time is to be 45 minutes;
Press, the roast is set to end at 14:00.
After the above setting, the screen shows the real time(hour
、
minute)and flashing
“
AUTO
”
,it means the set roast process is memorized
automatically.
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically.
In the roast time, and
“
AUTO
”
will be always flashing.
When the clock turns to be 14, the roast has been finished automatically. The alarm will ring and
“
AUTO
”
will flash, press the button
and the ringing will stop.
Semi-automatic setting (set the time of automatic starting and ending)
A.
Set the time limit of roast (10 hours maximum):
Press the button to set the time of roast;
The oven starts immediately, and
“
AUTO
”
will flash. After the roast is finished, the roast operation process will be shut automatically.
Then
“
AUTO
”
flashes, the alarm rings. The ringing will stop after the button is pressed.
B. Set the time of ending (23 hours 59 minutes maximum):
Press the button to set the time of ending;
The oven starts immediately, and
“
AUTO
”
will flash. When the set time of ending is reached, the roast process will shut automatically.
Then
“
AUTO
”
flashes, the alarm rings. The ringing will stop after the button is pressed.
When the related button is pressed, the set roast process will be displayed. Whenever the button is pressed, and set backward the
time to
“
0
”
,the set roast process will be cancelled. When button is pressed again, the oven will revert to the manual operation
process.
Timer
23 hours 59 minutes can be set as maximum.
To set the time, press the button, and then + or - button, until the required time is shown on the screen. After the setting, the correct
time (hour, minute) and the button will show on the screen. When the button is pressed the time displaced will be seen. When the
set time is reached, disappears and the alarm will ring again. To stop the alarm, press the button.
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the set process as well as the