background image

280 Size

FPV Racer

●Fully Assembled: No building or firmware loading 

necessary!

●On-Screen Display (OSD): Program or set up your 

Vengeance on-the-fly, no computer needed.

●In-Flight-Adjustable Single-Axis Camera Gimbal, Self-

leveling during flight.

●Vibration Dampened Second-Camera Mount.

●Robust,  Pure  Carbon-Fiber  Frame  with  Carbon 

Exoskeleton Reinforcements.

●Stress-Flex Designed to Withstand Impacts, Mass 

centralized for high-rate turning.

●Black-Anodized, High-Strength CNC Aluminum Boom 

Mounts.

●Tough, Translucent Polymer Landing Legs with Built-in 

Directional Red-Green LED. 

●8°Forward-Tilt  Motor  Mounts  for  Aerodynamic 

Efficiency and Top Speed Performance.    

●Four 2204, 2300Kv High-Output Brushless Motors.     

●Custom Compact BL-Heli 20A Motor Controllers (ESC).    

●Visual LED Flight Mode Indicator. Easy to confirm your 

flight mode.

●Pre-loaded with Three Flight Modes: Normal, Altitude 

Hold, or Acro Mode.    

●NAZE Spec 32 Bit Flight Controller 7DOF (with 

BMP sensor).    

●Altitude Hold via Integrated Barometric Pressure 

Sensor (BMP).    

●3S and 4S Battery Compatible. Hyperion G6 HV 

LiPo Suggested.    

●5.8GHz  Auto-Scan  40CH  Video  Transmitter 

(VTX) w/ Race Band  VTX selectable for either 

25mw/200mw output.   

●Tuned 5.8GHz CloverLeaf Skew-Planar Antenna.    

●Plug-n-Play Ready for Optional GPS modules.    

●Built-in Low-voltage Audible Alarm. 

●Compatible  with  Single  Wire*  or  Traditional 

Receivers (*S-Bus, Horizon Spektrum™ Satellite, or 

Hyperion Compatible receivers).    

●Box includes Carry Handle and Foam Racer 

Parts Holder, for service as field case.    

●One Set 6x4 CC/CCW Propellers Included.

Содержание HYPERION FPV RACER




















Отзывы: