TKG HC 3000
4
CUTTING SIZE ADJUSTMENT
A. Choose the suitable comb size depending on the haircut needed.
B. Assemble it with the blade
C. You can remove it by pushing the opening up
CHARGING METHOD
Base charging
l
Put the adaptor connector terminal into the base.
l
Make sure the product is in the position of Power Off and then put it into
charging base. The indicator will show a red color. As soon as it is fully charged,
the light will turn into green color.
l
Charging time is around 1.5 hours.
l
If using charging base, please connect the adaptor with the base and then
plug into the socket. And then put the product into the base to start the
charging.
Notes
: If the product was not being used for a long time, please ensure the battery is
charged at least one time within 3 months to avoid damage. Plug-and-play function
means that you can use the product while charging in case of insufficient power.
Direct charging
l
Put the adaptor connector terminal into the port of the product and then plug
into a socket. Switch on the product and then use it.
l
After using, switch off and then disconnect the adaptor.
l
If the battery has been used out, it may be difficult to start the product even if it
is plugged. You should restart it after charging at least one or two minutes. while
charging, the product body and the adaptor may be a little hot, however, it is
a normal phenomenon.
Warnings
l
Don’t charge the product more than 6 hours each time.
l
Don’t pull the cord in order to avoid any damage for adaptor.
l
Don’t take the adaptor out from the socket by wet hands to avoid the risk of
electric shock.
