When installing the Shoe Slider, it is suggested to secure the bottom shoe slider first, and then
unfasten the top cord to secure the top shoe slider. Please do NOT untie the top cord until the
bottom shoe slider is secured.
Please note all blind cords are interconnected.
Ensure the cords are not crossed or tangled.
Place Shoe Sliders into centre of Shoe Bases and slide towards the outer edge of Shoe as per
diagram below.
3
Install Blind
Installation
continued…
How to install, operate and maintain your
Great Job… Enjoy your new Veneta Blinds!
Please write a review on our
website at…
www.venetablinds.com.au
Feedback?
We would love to know how you
went with your installation…
Operating your
Blind
Lower and raise the blind using the handles on the top, middle and bottom rails.
Note the blind will close firmly at the top utilising the inbuilt magnets.
Maintaining your
Blind
1
Dusting
Dust can be removed using a feather duster or vacuum with brush attachment on low suction.
2
Spot Cleaning
Use a warm damp cloth or a mild detergent for tougher stains.
Dab the affected area, but do not rub the fabric. Finish with just a warm damp cloth.
Allow the fabric to dry in the lowered position.
3
Ultrasonic
If ultrasonically cleaning the blind please specify that a mild solution must be used.
Note the rails should never be immersed in liquid.
2
Smartfit Day & Night Honeycomb Blind
(25mm Cell)
Need HELP?
Call our
Customer Service team
for assistance
1300 836 382
