1
2
1
2
3
Programming Quick Guide
CONNECT POWER TO THE MOTOR
OPTION 1
OPTION 2
PROGRAMMING A TRANSMITTER
(Sec. 1)
1
Press and hold the
SYNC
button on the back of the transmitter
or
the white button on the head of the motor until the motor
starts moving
2
Check the motor rotation (
UP
or
DoWN
) then release the
SYNC
button or the white button (the motor now stops)
3
Within 5 seconds, press the corresponding button (
UP
if the
motor turns upwards or
DoWN
if the motor turns downwards.)
This will set the direction of the motor. If the incorrect button is
pressed, the controls will be reversed. To fix, see Sec. 3.
Transmitter is now programmed
ADDING A NEW TRANSMITTER
(Sec. 2)
When adding new transmitters, begin with the motor position
somewhere inbetween the two limits. This allows the motor to
have room to move, and allows the direction that the motor moves
to be discernible.
1
Press and hold the
SYNC
button on the back of a transmitter
ALREADY
paired until the motor starts moving in one direction
2
Check the motor rotation (
UP
or
DoWN
) then release the
SYNC
button (the motor now stops)
3
Within 5 seconds, press the corresponding button (
UP
if the
motor turns upwards or
DoWN
if the motor turns downwards)
on the NEW transmitter being added. This will set the direction
of the motor.
Additional transmitter is now added
CHECKING / CHANGING DIRECTION
(Sec. 3)
To check the direction, press the
UP
or
DoWN
button. The motor
will go
UP
or
DoWN
accordingly, if the direction needs to be
changed:
1
Press and hold the
SYNC
button on the back of transmitter until
the motor starts moving
2
Press the
STOP
button; the motor makes a brief jog. The direction
of the motor has been reversed
IMPORTANT: the change of direction procedure must be
performed before initiating the limit setting procedure,
otherwise limits will need to be reset
The buttons shown on the left are used to program the transmitters and specific channels.
The programing button’s (buttons 4 and 5) locations can be placed differently depending
on the transmitter model. Shown in this guide is the Emitto Slim line transmitter.
UP
(1)
the rolling shade/awning moves up
SToP
(2)
the rolling shade/awning stops
DoWN
(3)
the rolling shade/awning moves down
SYNC
(4)
program the transmitter
LIMIT
(5)
set limits
1
3
2
5
4
OFF
ON
