6
ASSEMBLY INSTRUCTIONS
STEP 1.
Find a safe location.
Minimum clearance on each side must be at least 2 inches (5 cm);
minimum clearance from the floor must be at least 11¾ inches (30 cm); minimum clearance from
the
front must be at least 3 feet (90 cm). Choose a location near an outlet so an extension cord is
not required.
DO NOT
position the unit directly below a power outlet.
See Safety Information on
pages 2 and 3 for more warnings about placement, installation, and use of this product.
NOTICE
The wall mount fasteners included with this fireplace are for use ONLY with a
wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder
blocks, or other wall types, consult a professional for the best attachment methods.
STEP 2.
Locate the wall studs using an electronic stud-finder. Studs are spaced 16” apart as
measured from the center of each stud. The holes in the mounting bracket (C) will align with the
wall studs. The end of each arm has a set of three holes. Select one set of holes (left, center, or
right) when attaching the mounting bracket to the wall. There are also two holes on the center post.
16”
16”
Studs
Drywall
Hook
Tab
C
16”
16”
16”
Note: The wall mount bracket
tabs are on the upper arms and
the hooks are on the lower arms.
Wall or other
objects at side
Wall or other
objects at side
Floor or other
surface
Minimum clearance:
2 inches (5 cm) from
edge of glass
Minimum clearance:
2 inches (5 cm) from
edge of glass
Minimum clearance:
11¾ inches (30 cm)
from bottom edge
Meijer.com