11
OPERATION
Read and understand
this entire owner’s manual, including
all safety information
,
before
plugging in
or
using
this product. Failure to do so could result in
electric shock,
fire, serious injury, or death.
Power
Make sure the ON/OFF switch, located on the control panel, is in the OFF position. Plug the power
cord into a 110~120 Volt 15 Amp grounded outlet (see
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3
). Make sure the outlet is in good condition and that the plug is not loose.
NEVER
exceed the maximum amperage for the circuit.
DO NOT
plug other appliances into the same circuit.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature (212
°
F / 100
°
C), the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
5. With the POWER switch in the OFF position, plug the power cord back into the outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
Methods of Operation
This electric fireplace can be operated by the CONTROL PANEL, located on the right side panel of
the fireplace (see figure below), or by the battery-powered REMOTE CONTROL. Before operating,
please review the
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3,
and heed all warnings.
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
Meijer.com