3
Assembly and Operation
Step 1:
Set upper base leg (A) into lower base leg (B).
Step 2:
Set pole support (C) onto base legs. Place washers (E) onto four Hex head bolts (E). Thread
bolts through pole support plate and into holes in base legs. Tighten bolts securely with wrench (H).
Step 3:
Place base assembly in desired location. Set pavers, or other weights weighing 200 lbs, onto
base legs.
Step 4:
Clip canopy top pole into canopy hinge. Clip both sections of canopy support pole together.
Step 5:
Slide main pole (F) through sleeve clamp and into end of curved upper support tube.
A
B
C
E
G
F
G
