Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 23 of 42
“C2” PRICE HOLDING (EXECUTIVE MODE)
If you set C2 = 1 and payment system is set to executive, the machine works in price
holding mode; it means that the price is stored on payment system. In this mode each
time you press a selection the machine sends to the payment system the n.° of selection
pressed in this way:
Sel 11 pressed – send 1 to payment system
Sel 18 pressed – send 8 to payment system
Sel 21 pressed – send 9 to payment system
…
Sel 46 pressed – send 30 to payment system
…
Sel 88 pressed – send 64 to payment system
If C2 = 0 the prices are stored on vending machine, and they are sent to payment system.
If C2 = 2 (from version 0.10) the machine works in price holding and the line of the price
must be programmed on the “PRICE” menu the machine show the price stored on the
payment system if it’s support the price show feature.
"C3" LOW CHANGE LEVEL (MDB MODE)
This number will be deducted to the coins tubes number reported by the changer in order
to calculate according to the low change equation the CORRECT CHANGE status
"C3" WAITING TIME AFTER VEND REQUEST (EXECUTIVE MODE)
This parameter is used to add extra time after vend request for long answers from
Executive cashless systems. Setting range: 0 up to 250 sec.
"C4" BILL ACCEPTED (EQUAL TO "C6" AND "C7")
Bills to accept when "CORRECT CHANGE" LED is OFF
"C5" BILL ACCEPTED IN LOW CHANGE CONDITION (EQUAL TO "C7" AND "C8" )
Bill to accept when "CORRECT CHANGE" LED is ON
